Version History
Here you can find the changelog of StarLine Master since it was posted on our website on 2019-07-10.
The latest version is 3.9.4 and it was updated on soft112.com on 19 April, 2024.
See below the changes in each version:
version 3.9.4
posted on 2024-04-01
- Quick entry via Bluetooth Smart has been disabled by default
- Vehicle model and CAN configuration saving into file has been fixed
version 3.9.3
posted on 2024-03-05
- A faster entry to configuration via Bluetooth Smart has been added. Configuration is entered much quicker as only the particular tab necessary settings are loaded.
- New devices support has been improved
- "Unknown value" indication in channels has been fixed
- Probable freezing in processing A93v2 with CAN modules has been fixedUS
version 3.9.2
posted on 2024-01-07
- Fixed update error (freezing) of the central unit of 3-5 generations, with a connected CAN module
version 3.9.1
posted on 2024-01-07
- Added an opportunity to control heaters. Through the dialogue window "Enable heaters control at remote engine start" installer may apply "Heaters control" FlexLogic programs on the vehicles with corresponding options supported
- Added the window with regional representatives contacts. In the main window and through "Support" button in configuration
- Probable program freezing by "Back" button click has been fixed
- Devices list displayig has been fixed
version 3.9.0
posted on 2023-10-26
- Gen6/7 devices remote configuration through starline.online service has been added
- Flexible Logic saving to file has been added
- Device ID indication has been added
- M18 Pro v2 and M18 Pro v3 trackers support has been added
- Changes indication in Flexible Logic program has been fixed
- Configuration and firmware files opening from operating system has been fixed
version 3.8.2
posted on 2023-09-06
- StarLine A90 and A90BT support has been added
- StarLine E90v2 support has been added
- StarLine E9v2 and S9v2 new versions support has been added
- French language support introduced
- Program freeze at switching diagnostics On / Off has been debugged
- Incorrect hood state indication in mobile version diagnostic tab has been debugged
version 3.8.1
posted on 2023-08-22
- Added M18 Pro v2 tracker support
- Added M66 V2 2CAN tracker support
- Added comments option for the failure report
- Added configuration entrance for unknown devices
- Settings files updated
- Recovered CAN module configuration entrance when vehicle is not set
- Firmware bin files saving option recovered
- Debugged program freezing at remote key firmware updating
- Debugged "Device is not supported" comment for 2CAN-LIN
version 3.7.2
posted on 2023-04-19
- Stability of operation with devices via USB and BLE has been improved
- Enter to settings of connected devices with general CAN library has been debugged
- The button "Download and update" operation at firmware downloading has been debugged
version 3.8.0
posted on 2023-04-19
- Support for 2CAN+2LINv10 is added
- Application data cleansing option added. Helps at instable operation.
- Default configuration files updated on latest versions.
- List of supported main units and remote keys is extended.
- Firmware library operation speed is enhanced.
- Android 12, 13: Firmware file saving feature is recovered.
- Configuration file saving via BLE is improved.
- Fixed an entry failure "Device does not support settings mode"
version 3.6.2
posted on 2022-04-11
- Added the option of connection points pictures zoom in CAN library
- added Android 12 support
- Added automatic internet connection checkup
- CAN firmware changelog is displayed on firmware download page in CAN library
- Now the program names along with numbers are indicated in Flexible Logic events and conditions
- Files opening has been optimized
- Fixed crash when connecting device via USB
version 3.6.1
posted on 2022-02-03
- Support for 2CAN+2LINv6 module has been added
- Application operation stability has been enhanced
- Android: The feature of the files open and sharing has been improved
- The device system logs saving dialogue form appearance has been improved
- Fixed the bug of the menu points in "Quick settings" mode different appearance than in "Advanced settings" mode
- The error report sending has been fixed
version 3.5.3
posted on 2021-10-29
- Improved operation stability
version 3.5.2
posted on 2021-08-25
- Added support for new remotes
- Added support for 2CAN+2LINv2 module
- Added support for Sigma 34 module
- Added the feature of CAN library update in device settings tab
- Added file save confirmation when the same file name existing
- Fixed an error in connection with can.starline.ru after a long program standby
version 3.5.1
posted on 2021-08-05
- Added a feature of viewing autostart connection diagrams in CAN library tab
- Added support for StarLine M67 tracking device
version 3.5.0
posted on 2021-05-12
- Added comments from can.starline.ru to CAN settings
- Added firmware version displaying while selecting from can.satrline.ru
- Added an option of resetting all channels features in 6 GEN settings
- Added P8 firmware version support for StarLine T94
- Added an option of saving program log in ZIP-archive
- Devices list rearranged in the new actual order
version 3.4.1
posted on 2021-02-18
- Added possibility to select both vehicle and device in CAN library tab.
- Added the status of software library synchronization with server, the list of firmware versions displayed quicker.
- Added T1 firmware version support for A93v2
- Fixed position of tick, that interfered setting the parking in CAN modules
version 3.4.0
posted on 2021-02-11
- Added new Quick settings for 6 generation systems (supported from 2.23.0)
- Improved can.starline.ru integration - now connection points and software update available right in settings tab
- Changed the way of channels and CAN interfaces managing for 6 generation systems (supported from 2.23.0)
- Added flexible channels setup via USB OTG for 3-5 generation systems
- Added the settings numbers for 3-5 generations systems
- Added the signal strength indication for detected BLE devices (RSSI)
version 3.3.1
posted on 2020-12-17
- Added the option of sharing settings, logs and other files
- Added support for 3 generation systems firmware version S6
- Added support for 2CAN+2LINv3 programming via transceiver cable
- Optimised launch on Android 11
- Fixed 2CAN+2LINv3 updating possible error
version 3.3.0
posted on 2020-11-16
- Support for 3rd-5th generation via USB OTG + StarLine programmer is added. Be sure to supply 12V power to central unit before programming
- Support for working with paired devices is added. The app will start working from 2.21.3 version for the 6th generation and from 1.9.2 version for I96 CAN
- CAN Library is added
- The ability to reset only one tab to factory settings is added
- Screen no longer fade out while app is running
- Links opening from list of firmware change is fixed
version 3.2.2
posted on 2020-09-22
- Added support of security-telematic system StarLine E96 v2
version 3.2.1
posted on 2020-08-18
- Added indication for connected device firmware updating opportunity
- Added opportunity to interrupt CAN library downloading in settings
- Added car brand search in CAN firmware list
- Optimised Flexible logic programs removal
- Fixed possible program hanging while commands execution in Diagnostics
- Fixed "Device is not connected" failure while CopyKey option execution on 6 generation devices
version 3.2.0
posted on 2020-07-07
- Added support of CAN software updating from can.starline.ru
- Improved switching the dependent functions of channels in 6 generation systems
- Fixed updating for i96 CAN of 1.3.1 and 1.3.2 versions
- Fixed the bug of not displaying the list of firmware when tap on "Update" button
- Fixed detection of Bluetooth programming module via USB OTG connection
version 3.1.0
posted on 2020-05-14
- Added possibility to display an authorization password entered.
- Added support of Spanish language
- Added support of S96v2 security and telematic system
- Added option of sending anerror report to developer
- Added possibility to open firmware and settings files in file manager
- Improved detection of paired devices
- The buttons in Diagnostics section are now actuated not with short click, but with tap and hold
version 3.0.2
posted on 2020-04-27
- Added German and Italian languages
- Added 2CAN+2LIN(v3) module support
- Added support of vertical screen remotes StarLine A96, B96
- Added background operation (updates and other processes will not interrupt after app shutdown or screen lock)
- Accelerated firmware library download
- Enhanced devices connection manuals
- Fixed start on some Android 5 smartphones
version 3.0.1
posted on 2020-02-25
- Fixed USB OTG support on Android 8 - 10
version 3.0.1
posted on 2019-12-10
- The algorithm for switching CAN settings has been improved
- Added color highlighting of directions and polarities of channels that can be changed
- Added support for new devices: StarLine M22-96, StarLine M67-96, StarLine AS96 (v2)
- Fixed scrolling of some lists off the screen
- Fixed work with R6 Eco
version 3.0.0
posted on 2019-06-17
Release
